990 Wheel Loader

  • Overview
  • Optional Services
  • View product Download

PROVEN RELIABILITY

PERFORMANCE AND PRODUCTIVITY

POWERFUL EFFICIENCY

PRODUCTIVITY WITH TECHNOLOGY

SAVE ON SERVICE AND MAINTENANCE

SAFETY FIRST

OPERATOR COMFORT AND CONTROL

PURPOSE BUILT SPECIALTY MODELS
 - MILLYARD

PURPOSE BUILT SPECIALTY MODELS
 - STEEL MILL

LONG TERM VALUE AND DURABILITY

Engine
Engine Model C27 Cat®
Rated Speed 1,800/min
Engine Power - ISO 14396 561 kW (752 hp)
Gross Power - SAE J1995 571 kW (766 hp)
Net Power - SAE J1349 - Standard Ambient 521 kW (699 hp)
Net Power - SAE J1349 - High Ambient 483 kW (648 hp)
Bore 137.2 mm (5.4 in)
Stroke 152.4 mm (6 in)
Displacement 27.03 l (1649.5 inu00b3)
Peak Torque - 1,200 rpm 3557 N·m (2624 lb/ft)
Torque Rise 18 % (18 %)
Emissions U.S. EPA TIer 4 Final and EU Stage V emission standards or U.S. EPA Tier 2 and EU Stage II equivalent
Transmission
Transmission Type Cat planetary power shift
Forward - 1 7.3 km/h (4.5 mile/h)
Forward - 2 13.3 km/h (8.3 mile/h)
Forward - 3 22.9 km/h (14.2 mile/h)
Reverse - 1 7.9 km/h (4.9 mile/h)
Reverse - 2 14.7 km/h (9.1 mile/h)
Reverse - 3 24.9 km/h (15.5 mile/h)
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 13.7 km/h (8.5 mile/h)
Direct Drive - Forward 3 24.5 km/h (15.2 mile/h)
Direct Drive - Reverse 1 8.7 km/h (5.4 mile/h)
Direct Drive - Reverse 2 15.4 km/h (9.6 mile/h)
Direct Drive - Reverse 3 26.4 km/h (16.4 mile/h)
Note Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Operating Specifications
Operating Weight 80974 kg (178517 lb)
Rated Payload - Standard 15.9 t (17.5 ton (US))
Rated Payload - High Lift 15.9 t (17.5 ton (US))
Bucket Capacity Range 8.6 mu00b3 u2013 10.0 mu00b3 (11.25 ydu00b3 u2013 13.0 ydu00b3)
Cat Truck Match - Standard 773-775
Cat Truck Match - High Lift 775-777
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit Positive flow control
Lift/Tilt System Variable displacement piston
Maximum Flow at 1,800 rpm (1) 910 l/min (240 gal/min)
Cylinders, Double Acting - Lift, Bore and Stroke 235 mm u00d7 1287 mm (9.3 in u00d7 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke 292.1 mm u00d7 820 mm (11.5 in u00d7 32.3 in)
Pilot System Open loop and pressure reducing
Relief Valve Setting - Main 3500 kPa (507 psi)
Relief Valve Setting - Lift/Tilt 33000 kPa (4786 psi)
Hydraulic Cycle Times
Rack Back 4.3 s (4.3 s)
Raise 8.2 s (8.2 s)
Dump 2.9 s (2.9 s)
Lower 3.7 s (3.7 s)
Lower Float Down 3.6 s (3.6 s)
Total Hydraulic Cycle Time - Empty Bucket 13.8 s (13.8 s)
Hydraulic System - Steering
Steering System - Circuit Pilot, load sensing
Steering System - Pump Piston, variable displacement
Maximum Flow at 1,400 rpm 364 l/min (96.2 gal/min)
Relief Valve Setting - Steering 34500 kPa (5004 psi)
Total Steering Angle 70u00b0
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.7 kg of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).
Axles
Front Fixed
Rear Trunnion
Oscillation Angle 8.5u00b0
Brakes
Brakes ISO 3450: 2011
Service Refill Capacities
Fuel Tank 1114 l (294.3 gal (US))
Cooling System 208 l (54.9 gal (US))
Engine Crankcase 75.7 l (20 gal (US))
Transmission 110 l (29.1 gal (US))
Differential - Final Drives - Front 271 l (71.6 gal (US))
Differential - Final Drives - Rear 261 l (68.9 gal (US))
Hydraulic System Factory Fill 795 l (210 gal (US))
Hydraulic Tank - Implement and Hydraulic Fan 261 l (68.9 gal (US))
Hydraulic Tank - Steering and Braking 132 l (34.9 gal (US))
Note All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEOu2011ULS™ or oils that meet the Cat ECF-3, API CJu20114, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) 65.5 dB(A) (65.5 dB(A))
Machine Sound Level (ISO 6395:2008) 115 dB(A) (115 dB(A))
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) 65.5 dB(A) (65.5 dB(A))
Machine Sound Level (ISO 6395:2008) 113 dB(A) (113 dB(A))
Buckets
Bucket Capacities 8.6 mu00b3 u2013 10.0 mu00b3 (11.25 ydu00b3 u2013 13.0 ydu00b3)

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • OPERATOR ENVIRONMENT
    • Air conditioner and heater with automatic temperature control
    • Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS)
    • 12V power port for mobile phone or laptop connection
    • Cat Vision, rear vision camera system
    • Cigar lighter and ashtray
    • Coat hook
    • Electro-hydraulic tilt and lift controls (seat mounted)
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Implement hydraulic lockout
    • Instrumentation, gauges:
      – Engine coolant temperature
      – Fuel level
      – Ground speed
      – Gear
      – Hydraulic oil temperature
      – Speedometer/tachometer
      – Torque converter temperature
    • Instrumentation, warning indicators:
      – Action alert system, three category
      – Automatic transmission model enable status
      – Brake malfunction
      – Bucket float status
      – Delayed engine shutdown status
      – Engine idle shutdown status
      – Engine malfunction
      – Fuel economy mode enable status
      – Hydraulic lockout
      – Lockup clutch enable status
      – Low fuel level
      – Parking brake status
      – Rimpull control enable status
      – Seatbelt warning
      – Secondary steering (if equipped)
      – Throttle lock status
      – Transmission gear
    • Keypad, control with indicator lights:
      – Auto trans mode speed range
      – Auto/manual transmission mode
      – Fuel economy mode
      – Implement kickout
      – Lockup clutch
      – Reduced rimpull
      – Throttle lock
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, leather/cloth, air suspension, heated/cooled
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC control system with steering lock
    • Tinted glass
    • Trainer seat with lap belt
    • Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
      – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • POWER TRAIN
    • Brakes, full hydraulic, enclosed, oil-disc
    • Axle-shaft oil-disc service brake
    • Electro hydraulic parking brake
    • Case drain screens
    • Cat clean emission module (Tier 4 only)
    • Demand fan
    • Engine Cat C27
    • Fuel priming pump (electric)
    • Ground level engine shutoff, bumper
    • Mufflers (under hood) (Tier 2 equivalent only)
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid, (ether) manual override
    • Throttle Lock
    • Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
    • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
  • ELECTRICAL
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance free (2 – 1,400 CCA)
    • Converter, 10/15 amp, 24V to 12V
    • Deutsch component connectors
    • Electrical system, 24V
    • Electronic transmission control
    • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
    • Starter, electric
    • Starter lockout in bumper
    • Starting receptacle for emergency start
    • Transmission lockout in bumper
  • OTHER
    • Automatic bucket tilt/lift kickouts electronically adjustable from cab
    • Axle temperature sensor
    • Battery disconnect and jump start receptacle, bumper
    • Coupling, Caterpillar O-ring face seals
    • Economy mode with on demand throttle
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CH4
    • Engine idle management features:
      – Auto idle kickdown
      – Delayed engine shutdown
      – Engine idle shutdown
    • Fenders, steel (front)
    • Guards, crankcase and power train
    • Grouped/labeled lube points
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Oil sampling valves
    • Positive flow control hydraulic system
    • Product Link
    • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
    • Venturi stack
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
  • OPERATOR ENVIRONMENT
    • Cab precleaner, powered
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth
    • LED warning strobe
    • CB radio ready
    • Window sun shade
  • MISCELLANEOUS ATTACHMENTS
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Axle oscillation stop
    • Heavy duty cab mounts

Enquiry Form

    REQUEST A CALL BACK
    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.